1 / 2
OPTOMEC - Jet 300CE Aerosol - 3D Printer
- Current bid
- Status
Total bid amount
See total breakdown
Total bid amount
See total breakdown
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- OPTOMEC
- Model
- Aerosol Jet 300CE
Description
Year of Manufacture: 2011
Machine has been shut down for some time (BIOS battery to be changed); No printing done, due to the lack of nozzle and accessories.
Minimum line width: ~10 μm (20 μm pitch; depends on material/surface, with ultrasonic atomizers).
Layer thickness (single pass): ~100 nm to > 5 μm.
Nozzle-to-substrate distance: up to ~5 mm (from nozzle tip to substrate).
Tray (standard): 300 × 300 mm, temperature regulation up to 120 °C.
Droplet size (nozzle): ~1–5 μm.
Ink viscosity ranges:
Ultrasonic: ~1–10 cP (requires a temperature-controlled water bath).
Pneumatic: ~1–1000 cP (heating may reduce viscosity).
System weight (standalone): ~795 kg.
Machine has been shut down for some time (BIOS battery to be changed); No printing done, due to the lack of nozzle and accessories.
Minimum line width: ~10 μm (20 μm pitch; depends on material/surface, with ultrasonic atomizers).
Layer thickness (single pass): ~100 nm to > 5 μm.
Nozzle-to-substrate distance: up to ~5 mm (from nozzle tip to substrate).
Tray (standard): 300 × 300 mm, temperature regulation up to 120 °C.
Droplet size (nozzle): ~1–5 μm.
Ink viscosity ranges:
Ultrasonic: ~1–10 cP (requires a temperature-controlled water bath).
Pneumatic: ~1–1000 cP (heating may reduce viscosity).
System weight (standalone): ~795 kg.
Additional details
The dimensions and weights indicated for each batch are provided as a guide and correspond to the current condition of the equipment.
Certain dismantling, handling or packaging operations can modify this data and influence the methods of transport.
It is the buyer's responsibility to check the necessary specifications before any transport or collection arrangements.
Pick-ups will only be made after full payment of the invoice and by prior appointment.
Depending on the batch, loading aid or specific handling conditions may be applied.