1 / 7
PFAUDLER - 2019 - BE4800 - Enamelled reactor
- Current bid
- Status
Total bid amount
See total breakdown
Total bid amount
See total breakdown
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- PFAUDLER
- Type
- BE4800
- Year of build
- 2019
- Serial number
- 4301175
- Temperature range min.
- -25°c
- Temperature range max.
- 200°c
- Own weight
- 7500kg
- Terms of delivery
- Loaded on truck
Description
Very nice opportunity for a 4800L enameled reactor of premium quality, in excellent condition, with its backrest.
Total volume: 6122L
Configuration:
- 5 stages of blades leading to a very good homogeneity of agitation and allowing the reactor to be used in sections of 1/5. It can therefore be used at different filling levels 1/5, 2/5, 3/5, 4/5 or 5/5.
- Turbines of type TBX, consisting of a 5-stage CRYO-LOCK* shaft with a shaft head of Ø 100 mm in accordance with DIN 28 159. Distance from the bottom of the reactor: 200 mm.
• 1 CRYO-LOCK type TBX impeller (4 blades per hub), 860 mm in diameter for the lower level.
• 4 CRYO-LOCK type TBX turbines (4 blades per hub), 820 mm in diameter for each of the following levels.
- Bowl with 2 counter-blades. One has a built-in sampler, the other is equipped with a double temperature probe.
- Mechanical seal with Interseal Dry9000 lip seals. Nitrogen
lubrication - Double envelope: 300L. There are 3 coil zones, allowing only the lower zone to be heated, or 2 or 3 zones depending on the reactor load.
- Foamglas® insulation (superior quality), stainless steel welded shell. So chargeable as is on cradles.
- Enamel condition: excellent, no signs of damage, no tantalum screws. PPG PHARMAGLASS** premium "light blue" special enamel with ASG (anti-static glass) special anti-static finish, with the manufacturer stating that corrosion resistance is not affected by anti-static properties.
- Sold with enamel column and Pfaudler
sample collector - Sold with high-value spare parts: Breakwater, quatro tube, stirring
shaft Previous operating conditions for wear assessment: see notes
Plans and technical details, see attached
documents
Total volume: 6122L
Configuration:
- 5 stages of blades leading to a very good homogeneity of agitation and allowing the reactor to be used in sections of 1/5. It can therefore be used at different filling levels 1/5, 2/5, 3/5, 4/5 or 5/5.
- Turbines of type TBX, consisting of a 5-stage CRYO-LOCK* shaft with a shaft head of Ø 100 mm in accordance with DIN 28 159. Distance from the bottom of the reactor: 200 mm.
• 1 CRYO-LOCK type TBX impeller (4 blades per hub), 860 mm in diameter for the lower level.
• 4 CRYO-LOCK type TBX turbines (4 blades per hub), 820 mm in diameter for each of the following levels.
- Bowl with 2 counter-blades. One has a built-in sampler, the other is equipped with a double temperature probe.
- Mechanical seal with Interseal Dry9000 lip seals. Nitrogen
lubrication - Double envelope: 300L. There are 3 coil zones, allowing only the lower zone to be heated, or 2 or 3 zones depending on the reactor load.
- Foamglas® insulation (superior quality), stainless steel welded shell. So chargeable as is on cradles.
- Enamel condition: excellent, no signs of damage, no tantalum screws. PPG PHARMAGLASS** premium "light blue" special enamel with ASG (anti-static glass) special anti-static finish, with the manufacturer stating that corrosion resistance is not affected by anti-static properties.
- Sold with enamel column and Pfaudler
sample collector - Sold with high-value spare parts: Breakwater, quatro tube, stirring
shaft Previous operating conditions for wear assessment: see notes
Plans and technical details, see attached
documents
Remarks
* Refer to the attached doc for more information on the technology
** Advantage of "light blue" enamel over white enamel (manufacturer's information): see attached doc
Reactors were used only for crystallization, never for chemical reactions. There has therefore been no ageing due to severe chemical reaction conditions inside, even though they are designed for this (-1/+6 bar). The maximum temperature was 70 °C. The cooling rate was only 1 °C/h. Only one product was used. The unit has been in operation for only 2 years and has been out of service for about 2 years.
This equipment can be supplied with an internal cleaning certificate (no external certificate).
Spare parts included
> Breakwater for BE 4800L reactor (Crystallizer) DN200 mounting manifold Plunge length 3100mm with 2*PT100 probe type TMI according to plan N° PJ0018039
> Quatro Tube for BE 4800L Reactor, Introducer Tube DN 50 Plunge Length 3100mm without Temperature
Probe > Cryo-Lock stirring shaft 3949mm total length 5 levels with stirring head diam.100mm For reactor type BE 4800 L according to plan N° PJ0018039
** Advantage of "light blue" enamel over white enamel (manufacturer's information): see attached doc
Reactors were used only for crystallization, never for chemical reactions. There has therefore been no ageing due to severe chemical reaction conditions inside, even though they are designed for this (-1/+6 bar). The maximum temperature was 70 °C. The cooling rate was only 1 °C/h. Only one product was used. The unit has been in operation for only 2 years and has been out of service for about 2 years.
This equipment can be supplied with an internal cleaning certificate (no external certificate).
Spare parts included
> Breakwater for BE 4800L reactor (Crystallizer) DN200 mounting manifold Plunge length 3100mm with 2*PT100 probe type TMI according to plan N° PJ0018039
> Quatro Tube for BE 4800L Reactor, Introducer Tube DN 50 Plunge Length 3100mm without Temperature
Probe > Cryo-Lock stirring shaft 3949mm total length 5 levels with stirring head diam.100mm For reactor type BE 4800 L according to plan N° PJ0018039
Additional details
⚠️ ATTENTION, please!
Please read the special terms and conditions of sale.
Visits are possible but by appointment MANDATORY at: info@r-t.fr
Pick-ups will be mandatory by appointment from June 25 to July 15.
A cost of dismantling, packaging (palletizing with plastic film or cardboard), provision with loading on an adapted vehicle will be imposed and the price of the service will be visible on each lot (Additional costs).
➡️ Without making an appointment, no equipment can be delivered on site.
➡️ Pick-ups can only be done with adapted vehicles.
Before booking transportation, please confirm the final specifications with the seller.
If you would like to get a packaging and transport quote, please contact JMA-EXPRESS company: auction@jma-express.com
