CRENO - TM 3 - 3-Axis Horizontal CNC Machining Center
1 / 15
- Current bid
- Status
Activate Auto-bid
Recommended
About this lot
Machine sheet
- Pins: 4
- Speed: 1,800 – 24,000 rpm
- Measurement: Laser altitude for depth
The machine is equipped with a 6 kW COLOMBO tool change spindle (380V, 400Hz) on the U-axis. Speed 0–24,000 rpm via inverter; potentiometer 50–100% of the programmed speed.
- Magazine 12 ISO 30 tool holders — automatic change in hidden time.
- Manually adjustable tilt: max 20°.
- Autonomous ventilation: fan attached to the motor shaft, 4.4 kW at 24,000 rpm.
- Manual assembly of the tools: ER25 clamps.
Measurement cycle
- Fast descent up to Z = 2 mm
- Reduced descent in 0.1 mm increments
- Then 0.01 mm increments until the laser is initialized
- Final descent of the Z-axis of the programmed dimension (relative)
Drilling unit
Group B5 T50 to T59 — 10 individual selectable outputs, 2.2 kW at 4,500 rpm.
Stapler
SENCO stapler with 300 staple magazine. Software counter and recharge clearance cycle manage the charger.
Remarks: Machine sold without vacuum pump. Hardware around the machine not included.
- Lot number:
- A1-39688-7
- Location:
- Rhône Alpes, FR
- Sold by:
- Company seller
Lot specifications
- Quantity
- 1
- Margin
- No
- Brand
- CRENO
- Type
- TM 3
- Speed till n=
- 24000rpm
- CNC control, brand, type
- NUM FTP 40
- Total dimension L
- 10000mm
- Total dimension W
- 6500mm
- Total dimension Height
- 3000mm
- Terms of delivery
- Loaded on truck
Documents
Attention please!
Tous les lots seront vendus sans garantie, en l’état, sur site. La majorité des équipements est encore en service ou récemment démontée. Possibilité d'enlèvement sur rendez-vous après validation du paiement.
Les dimensions et poids sont indicatifs. Le démontage ou l’emballage peut les modifier. Avant de réserver le transport, veuillez confirmer les caractéristiques finales auprès du vendeur ou du prestataire de démontage.
🔧 Informations importantes concernant les enlèvements :
Les enlèvements des lots seront organisés selon le calendrier suivant, uniquement sur rendez-vous avec le vendeur, à convenir après règlement :
Lots n°1 à 5, 6, 15 à 18, 19 à 36, et 20 à 63 : enlèvement possible à partir de la semaine 2, soit à compter du 6 janvier 2026.
(À noter : certains lots, notamment les lots n°6, 19, et 21 à 36, sont déjà disponibles physiquement sur site. Merci de vérifier directement avec le vendeur pour anticiper si besoin.)
Lots n°7 à 14, 37 à 49 : enlèvement possible à partir de la semaine 6, soit à compter du 3 février 2026.
Merci de tenir compte de ces dates dans votre organisation logistique.
more from the