1 / 5
Industrial Control Valve (9x)
- Current bid
- Status
€
Total bid amount
See total breakdown
Total bid amount
See total breakdown
€
Max bid amount
See total breakdown
Max bid amount
See total breakdown
Lot specifications
- Quantity
- 9
- Margin
- No
Description
Model: S20, Series: J4C
Voltage: 24-240 DC or AC (50/60Hz)
Wiring: 2-wire VDC or 3-wire VAC/VDC options
Working time: 5 seconds per 90 degrees
Working angle: 90°
Duty cycle: 75%
Maximum torque: 25 Nm
Temperature range: -10°C to +100°C
Certification: CE
Serial Number: 02005783953
Type of product: Electrically operated 2-way or 3-way ball valve. The image shows a 3-way valve (with 3 connections).
Drive: The red actuator is electrically operated.
Voltage: The device operates on 24V DC (direct current) or AC (alternating current), as indicated on the label ("24V DIC OR AC").
Connection: The faucet has female thread connections
Application: Such faucets are used for fluid control in various industrial and domestic systems.
*Schubert & Salzer Control Actuator, model CA24C
3/2-Way Motor Valve DN 15 up to DN 40 compact 7210
7210/020VK102011
This is an electric actuator for a valve, . Such devices are often used in hydraulic systems or in heating and cooling applications to control the flow of oil or fluid through a valve.
Important details of the nameplate are:
Type: 7210
PN40
Connection: 24 VAC/DC
Usage: Directional Control Valve or actuator
*Belimo LRF24-MP-O quarter-turn valve actuator, designed for HVAC systems.
It is a modulating (0-10V/2-10V) fail-safe actuator.
It has a torque of 4 Nm.
It operates on AC/DC 24 V.
It has an IP54 protection rating.
The actuator is overload protected and does not require limit switches.
*Belimo NRF24AX-MP damper actuator.
Torque: 10 Nm.
Supply voltage: AC/DC 24 V.
Degree of protection: NEMA 2/IP54.
Function: Serves as an analog/digital converter for transmitting sensor signals via MP-Bus.
*J+J model J3 electric ball valve.
Model: L20, Type J3
Voltage: 12-24V DC or AC (50/60Hz)
Working time: 12 sec./90°
Temperature range: -20°C to 70°C
Max. torque: 25 Nm
Remarks
*Model: L20 J3
Voltage: 12-24V AC or DC, with automatic voltage detection
Max. torque: 25 Nm
Working time (for 90°): About 12 seconds
Temperature range: -20°C to 70°C
IP Rating: IP67 (Fully Weatherproof)
Material (tap): Stainless steel (SS)
Features: Manual emergency operation, thermostat-controlled anti-condensation heater and electronic torque limiter are standard built-in.
J+J L20 J3 electrically operated ball valve. This particular unit is a 3-way stainless steel ball valve with an electric actuator, designed for precise fluid control in industrial applications.
Specifications
Brand & Model Actuator: J+J model 520, series 3xx (J3-L20).
Ball valve: 3-way, full-bore, stainless steel.
Voltage: Multi-voltage with automatic voltage detection, from 12V to 240V AC/DC.
Torque: Maximum 20Nm.
Connection: 1 inch (DN25) threaded connection.
Functions: Standard on/off (power open/power close) with a manual operation and a visual position indicator.
Additional details
The collection of the purchased goods is done as follows:
After receiving your payment, the seller will contact you to make a pick-up appointment. You will then receive the exact address.
The city and province where the plots are located is indicated with the plot.
The minimum age for visiting the collection days is 18 years. Visitors must be able to identify themselves.
There is no right of withdrawal. See the Auction Terms and Conditions for more information.
No viewing day will be organized for this auction.
For each lot, an administration fee of € 100 will be charged.
