MAN 2012 DINO 5 Vacuum Sweeper

Suction nozzle - In conjunction with the power arm, the suction nozzle can be hydraulically rotated proportionally 360° in both directions and radio-controlled. The trucks are equipped with an IKE system that allows heavy and compacted soil to be loosened via a rotation of the suction nozzle without the use of a breaker or gas hammer. This again increases the return. Material cabinets and tools - must be mounted on the pedestrian side for the safety of the operators. The material cabinets are accessible from the pedestrian side. The operators do not always have to take passing traffic into account when they want to remove equipment from the truck. Furthermore, there are several breakers, air lances and even a gas hammer in each truck. All tools that do not have to be made available by you and increase the work rhythm. High-pressure cleaner with a water tank up to 1,000 liters. All cars are equipped with a high-pressure cleaner. In addition to compressed air, we can also use water in the free suction of underground structures. This high-pressure water pump of 50 l/min and 220 bar can draw water from a 1,000 liter reservoir. Substructure - hydrostatic and radio controlled, windscreen, reverse and steered from the workshop. The trucks are also equipped with automatic steering and driving systems. This system allows the truck to be moved without switching off the turbines. This way, no time is lost for shutting down the turbines, getting into the cab, putting the truck in driving mode, moving the truck to the next work hole, putting the truck back in suction mode, leaving the cab and restarting the turbines. We can steer the truck from one work hole to the next with turbines running without performing all these actions. It goes without saying that this increases the return. MEGA Arm with a working length of 10 m. The mega power arm allows for a longer range and a higher use of force. An extremely long and stable suction arm with 6 joints, a suction tube of 8 meters and a suction tube diameter of 250 mm. With the suction tube we have a range of over 10 meters. Hydraulic power arm – a hydraulic mobile proportional radio-controlled suction arm. Our trucks are equipped with a hydraulic working arm and not with a manual working arm, better known as a Dutch arm. A hydraulic arm is less stressful for the operators. Their work rhythm therefore remains constant. In general, we can say that the operators can operate the arm faster, easier and more correctly via the remote control. It is also not always possible to operate the arm manually. If the sucked hole becomes too large or too deep, it is impossible for the operator to remain standing next to the arm. A radio control is then the solution.